Assembly Instructions
Step 13:
Step 14:
Place the frame pad (H) on top of the springs. Adjust the frame pad so that the
slits are directly above the T-sockets.
Important: Don’t use the trampoline without the frame pad. It’s designed to protect
your little jumpers! Trust us on this one.
Look under the trampoline. Find the straps that are attached to the underside of
the frame pad (H). Position the outer straps so that one strap is on each side of
the frame. Position the inner straps so that one strap is threaded through a
V-ring. Now tie all of the straps in bows. (Because if you tie them in knots, you’ll
have a pretty hard time untying them ever again!)
Page 14 of 22
To Next Page
Loading...
