Need help?Do you have a question about the AGCO FENDT 9490 x and is the answer not in the manual?
General| Brand | AGCO |
|---|---|
| Model | FENDT 9490 x |
| Category | Farm Equipment |
| Language | English |
Introduction to the operator, company policy, warranty, and spare parts.
Defines intended use, prohibited uses, and compliance with directives and standards.
Details location and information on machine identification and type plates.
Provides diagrams and identification of machine parts and operational descriptions.
Discusses environmental issues and considerations for machine operation.
General safety precautions, guidelines, symbols, road transport, field work, and maintenance.
Details warning and instruction decals on the machine and their listing.
Covers emergency exit, safety belts, safety stop, railings, guards, and trailer hitch.
Safety precautions related to hydraulic systems, including hoses.
Discusses shafts and weight distribution for safety.
Details the arrangement of main components within the operator's cab.
Crucial safety measures for operating the machine while moving.
Procedures for safely starting and stopping the engine.
Explanation of steering, brakes, and other drive control elements.
Operations and settings related to the Vario terminal interface.
Adjustment of the operator and instructor seats.
Information on electrically adjustable rearview mirrors.
Details on accessing the cab, engine compartment, and cleaning screens.
Information about the machine's lighting system.
Operation and components of the climate control system.
Safety measures specific to the Auto Level combine and table operation.
Procedure for attaching the Auto Level table to the combine.
Adjustment combinations for Auto Level combine and table.
Operation and manual control of the Auto Level combine.
Principle and usage of the Auto Level table.
Operation of the combine and table with Auto Level system.
Calibration procedures for Auto Level combine and table.
Common issues and solutions for the Auto Level system.
Maintenance tips and user advice for the Auto Level system.
Safety measures specific to cutting tables.
Procedures for attaching and removing tables.
Information on trailer attachment and brakes.
Operation, adjustment, and maintenance of the reel.
Details on the knife and its drive system.
Operation of the table auger and cut-off strip.
Information on transmissions for cutting tables.
Operation and maintenance of the PowerFlow table.
Usage instructions for crop lifters.
Details on vertical knives, rape augers, and straw dividers.
Fitting and use of fixed table auger fingers.
Components and operation of the main crop elevator.
Safety measures for table and threshing unit operation.
Controls and settings for table height, cutting height, and auto-level.
Engagement and adjustment of the threshing mechanism.
Operation and adjustment of the electrically adjustable concave.
Details on concave filler plates and rotors.
Operation and adjustment of the straw chopper and spreader hood.
Operation of fanning mill, shaker shoe, and sieves.
Systems for internal grain transport and unloading.
Adjustment and operation of the rotor feeder.
Setting and operation of the chaff spreader.
Specific procedures for maize threshing.
Suggested harvest settings for optimal performance.
Safety measures related to transmission adjustments.
General and hydrostatic transmission adjustments.
Details on various transmission components and their adjustments.
Diagrams illustrating transmission layouts.
Procedures for adjusting foot brakes and parking brake.
Safety measures for engine operation and maintenance.
Information on engine types.
Details on the air intake filter system.
Components and maintenance of the cooling system.
Fuel requirements, system, and filter changes.
Information on the SCR system, its components, and DEF.
Details on closed crankcase ventilation.
Procedures for engine oil and filter changes.
Cleaning the engine compartment and vibration damper.
Electronic engine monitoring and troubleshooting.
Safety measures for hydraulic system operation and maintenance.
General hydraulic system information and storage.
Operation and servo steering of the hydrostatic system.
Functions and types of auxiliary hydraulics.
Procedures for draining, filling hydraulic oil, and changing filters.
Safety measures for electrical system operation.
Information on the charging system and electrical boxes.
General information about the electro-hydraulic system.
Safety measures for lubrication and maintenance tasks.
Operational description and maintenance of tracks.
Charts and intervals for machine lubrication.
Preliminary service and required maintenance schedules.
Procedures for changing gearbox and final drive oil.
Maintenance of the climate control system.
Cleaning the moisture sensor.
Procedures for cleaning and storing the machine off-season.
Details on optional extras like four-wheel drive, extra camera, table trailer, guide system, etc.
Operation, adjustment, and maintenance of the Maxi Spreader.
Dimensions, specifications, and tyre specification tables.
To Next Page