4
How to Install I
How to Install I
-
-
1
1
The below is important information that should be checked during installation.
1. The recommended work space for printing is 5M*5M.
(Actual Machine size => 3.5M*1.52M*1.6M)
2. The room in which the printer shall be installed should be easy to clean, dust-free space,
Electromagnetic-free space.
Reasonable temperature in 68 ~ 85℉(20~29℃) should be kept. Humidity in 20%~80% as well.
※ Requirement for installation
3. This equipment should be installed on horizontal surface in order to get the printing in the best quality.
4. The equipment should be run with single grounding.
5. In case the safety of working space is required, gas ventilation system will be asked, and the
exhaust duct and ventilation fan should be installed
20% to 80%
Non-condensing
68℉ to 85℉
(20℃ to 29℃)
Humidity
Temperature
To Next Page
Loading...
