5
How to Install I
How to Install I
-
-
2
2
※ List of Notice in relocating the printer.
- As shown in below, the equipment should be lifted up at the marked position.
- When forks of lifter are inserted, be aware not to damage (scratch) the equipment !!
- After checking the left & right balance of equipment, the equipment should be lifted up slowly.
( Please attention that it is sensitive device for impact. )
- Please check a relocating route before carrying by Lifter.
1. Dismantle the front and the upper of WOODEN BOX.
(Remove the screw on the Front and Upper with a driver or electric tool.)
2. After dismantling the packing box, the equipment is relocated by Folk Lifter.
To Next Page
Loading...
