AGFA Drystar 5302 Installation Planning

HEALTHCARE
Imaging Services
Chapter 11
Installation Planning
Document No: DD+DIS148.05E
DRYSTAR 5302
Type 5366/100
Edition 1, Revision 2
This documentation is separately available. Order No: DD+DIS148.05E.
CONFIDENTIALITY NOTE:
Use, dissemination, distribution or reproduction of this document by unauthorized personnel is not permitted and may be unlawful.
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
12-2007 printed in Germany
Agfa Company Confidential
Document Node ID: 15602908
eq_11_install-planning_e_template_v04
Copyright © 2007 Agfa HealthCare N.V.
1

AGFA Drystar 5302 Specifications

General

Printer Type	Dry thermal printer
Resolution	320 dpi
Maximum Throughput	100 films/hour (35 x 43 cm / 14 x 17")
Film Sizes	8x10", 10x12", 11x14", 14x17"
Maximum Print Size	14x17"
Connectivity	Ethernet
Power Requirements	100-240 V, 50/60 Hz