AGFA DX-D 600 - Page 16

DX-D 600
User Manual
0242F EN 20181218
8
1.3.4 X-RAY GENERATOR
Illustration 1-5
DX-D 600 X-ray Generator
 The Generator Cabinet comprises the Power Module, which contains the
power and control components and the High Voltage Transformer.
 The Generator is controlled by multiple microprocessors providing
increased exposure consistency, efficient operation and extended X-ray
Tube life. A high level of self-diagnosis greatly increases serviceability
and reduces down time.
 Constant potential high frequency that provides all the advantages of
high frequency w ave form Generators including lower patient dose,
shorter exposure times and greater accuracy and consistency.
 Three point control by selecting kVp, mA and ms, or two point control by
selecting kVp and mAs (no AEC), or one point control by selecting kVp
with AEC operations.
 Automatic Exposure Control (AEC).
 Fail-safe function (Receptor detection and exposure rapid termination).
 Tw o DR Detectors can be directly connected to the Generator.
 Equipped with closed loop control of X-ray Tube current, kVp and
filaments, which minimizes potential errors and the need for
readjustments.
 Automatic line compensation due to closed loop operation of X-ray Tube
current and kVp.