Need help?Do you have a question about the AGFA DR 400 and is the answer not in the manual?
General| Type | Digital Radiography System |
|---|---|
| Vertical Travel | 150 cm |
| Detector Type | Flat Panel Detector |
| Dynamic Range | 16 bits |
| Generator Power | 50 kW |
| SID Range | 100 cm to 180 cm |
| Image Acquisition Time | ≤ 3 s |
| Power Requirements | 50/60 Hz |
| Compatibility | DICOM 3.0 |
Describes the manual's scope and explains safety symbols and notices.
States Agfa's liability regarding the document's accuracy and changes.
Specifies the system's purpose and defines the target audience for the manual.
Details the system's components and available configurations.
Lists optional components and accessories for the DR Detector and system.
Describes tables, stands, displays, and consoles for system operation.
Covers controls for the X-ray generator, DR detector, and collimators.
Explains the function of emergency stop and shutdown controls.
Outlines installation, HF-emission, and immunity considerations.
Covers radiation protection measures and equipment labels.
Provides instructions for cleaning and disinfecting the system.
Details maintenance schedules and procedures for system components.
Lists general safety precautions and specific guidelines for the X-ray system.
Details safety instructions related to the use of the radiographic table.
Covers system startup and detailed steps for image acquisition.
Explains system positioning for exposures and proper shutdown procedures.
Explains console navigation, parameters, and status indicators.
Describes Automatic Exposure Control (AEC) settings and generator controls.
Identifies system components and explains X-ray tube stand positioning.
Covers tabletop adjustment, bucky positioning, and table accessories.
Explains the controls and features of the manual collimator.
Details automatic collimator modes and the integrated DAP meter.
Identifies wall stand components and explains positioning procedures.
Details bucky movement and lists wall stand accessories.
Explains bucky types, formats, and DR detector orientation.
Covers the use of grids and the Automatic Exposure Control (AEC).
Covers starting, stopping, and start-up modes of the generator.
Details generator signals, error messages, and exposure parameters.
Addresses generator/NX connection problems and collimation issues.
Explains solutions for exposure failures and system startup problems.
Covers DR detector temperature and recalibration issues, and system errors.
Details system compatibility, network connectivity, and compliance with standards.
Lists available technical data sheets for system components and their specifications.
To Next Page
