To Next PageTo Next Page
Need help?Do you have a question about the AGFA CR Series and is the answer not in the manual?
General| Type | Computed Radiography (CR) System |
|---|---|
| Resolution | Up to 10 pixels/mm (depending on model and image plate) |
| Connectivity | DICOM |
| Applications | General Radiography, Mammography |
| Laser Type | Solid-state laser |
| Power Requirements | 100-240V AC, 50/60Hz |
This document provides information on the structure and contents of the Service Manual.
Provides a summary of all chapters within the Service Manual.
Describes the general safety relevant information and instructions for the Service Engineer.
Explains the meaning and circumstances of various icons used in the manual.
Provides critical safety notes for performing service tasks on the digitizer.
Details the initial steps required before installing the digitizer.
Outlines the optional and mandatory steps to complete the digitizer installation.
Describes the process of adding users and configuring their rights in the system.
Provides a high-level overview of the digitizer and its components.
Details the main hardware components and their functions within the digitizer.
Illustrates the step-by-step process of using the digitizer system.
Describes the intended application environment and usage of the digitizer.
Provides critical safety notes for performing service tasks on the digitizer.
Lists specific tools required for digitizer maintenance and repair.
Explains how to access and use the digitizer's service interface.
Classifies symptoms to guide the troubleshooting procedure.
Details error codes, their meanings, causes, and solutions.
Troubleshooting steps for issues indicated by a slow red blinking or off status LED.
Provides an overview of adjustments and calibrations for the digitizer.
Explains the process for compensating image inhomogeneities for better quality.
Provides a diagram for identifying functional elements and covers of the digitizer.
Contains circuit diagrams for the digitizer on printed circuit board level.
Lists spare parts related to the digitizer's exterior covers.
Lists electrical components, cables, and connectors for the digitizer.
Lists spare parts related to the image plate handling and scanning mechanism.
Describes the preventive maintenance tasks for the digitizer.
Specifies the minimum space needed for operation and maintenance.
Details electrical connection requirements for the digitizer and UPS.
Outlines North American and European safety standards the digitizer complies with.
Provides explanations of product-specific terms and abbreviations used in the service manual.
Instructions on how to add the order list for documentation from MEDNET.
Guidance on printing specific parts or the entire service manual.
