EasyManuals Logo

AGFA CR Series User Manual

AGFA CR Series
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #275 background imageLoading...
Page #275 background image
DD+DIS170
.11E
Installation Planning
123
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 11 / Page 21 of 24
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential
8.8 Interface Data
Interface to NX workstation
Via Ethernet 10/100 Base Ethernet
(auto-negotiate)*
* Gigabit Ethernet is not supported.
8.9 Service Data
Info counter
Yes
Error diagnostics built in
Yes
Remote / preventive service capable
Yes
8.10 Functional Data Image Plates
Image plate type
CR MD1.0
Image retention
Within 1 hour Recommended readout time
After 2 hours 70 % of the stored energy is still present with
no visible loss of information upon readout.
After 24 hours Image retention still exceeds 45 %.
Slightly reduced image quality
Image plate Usage
Image plate expires after 5 years
9 Safety Standards
The digitizer complies with:
North American Standards
Federal Communications Commission
Canadian Standards Association
Underwriters Laboratories
Code of Federal Regulations
European Norm and International
Standards
European Norm
International Electrotechnical Commission
EMC*
CSA 22.2 No. 601.1.2
FCC part 15
EN 60601-1-2:2007
Safety
UL60601-1:2003
CSA C 22.2 No. 601.1:1990 +
S1:1994 + A2:1998
CFR parts 1040.10 and
1040.11
CSA-E60825-1-03
EN ISO 13485: 2003
IEC 60601-1:1988 + A1:1991 +
A2:1995
IEC 60601-1: 2005
IEC 60825-1: 2007
* EMC = Electromagnetic Compatibility

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AGFA CR Series and is the answer not in the manual?

AGFA CR Series Specifications

General IconGeneral
TypeComputed Radiography (CR) System
ResolutionUp to 10 pixels/mm (depending on model and image plate)
ConnectivityDICOM
ApplicationsGeneral Radiography, Mammography
Laser TypeSolid-state laser
Power Requirements100-240V AC, 50/60Hz

Related product manuals