DD+DIS155
.11E
Functional Description
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
1.6 Main Functions of the NX Workstation
The NX Workstation is a CR workstation. It is used for:
Acquiring images from the digitizer.
Acquiring patient and examination data either by manual input or from a worklist
provided by a RIS (Radiologic Information System).
Combining patient and examination data with the acquired image.
Performing automatic Musica (Multiscale Image Contrast Amplification) Image
Processing based on predefined, examination based parameters
Modifying the image appearance of acquired images
Performing quality control of the images of the X-Ray department
Transferring images for diagnosis to a hardcopy printer or softcopy station and
to a PACS (Picture Archiving and Communication System) system for archiving
Burning images on CD ROM
Hardcopy
CD ROM
Digitizer
Cassette
X-Ray Modality
Softcopy
PACS
NX Workstation
DICOM
“Manual” Data Transfer
515102bd.cdr
Figure 6
For more information refer to the NX workstation service manual.
Edition 1, Revision 1 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 2 / Page 8 of 19
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential
To Next Page
