DD+DIS155
.11E
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 1 / Page 10 of 47
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential
4 Finalizing the Installation
The following tables list the mandatory and optional steps to finalize the installation:
# Optional Steps, depending on the local situation Section
1 Add windows and NX users. 4.1
2 If required: Configure digitizer and NX for the local network. 4.2
3 Setup connectivity to additional system components (RIS,
PACS, Hardcopy, etc.).
4.3
4 Customize system components according to customer
preferences.
4.4
5 Finalize the workstation installation. 4.5
6 Check software version. 4.6
# Mandatory Steps Section
1 Perform further activities depending on local regulations. 4.7
2 Inform the customer about the digitizer system. 4.8
To Next Page
