AGFA CR Series - Setup of Connectivity to Additional System Components; Customizing System Components According to Customer Preferences; Finalizing the Workstation Installation

DD+DIS155
.11E
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
(20) In service menu <Backup> select:
<Complete backup> and <SAVE
TO USB Digitizer>.
(21) Select: <Logout>
Figure 14
4.3 Setup of Connectivity to additional System Components
(1) Use the corresponding connectivity release documents for setup of additional
system components, see Agfa HealthCare Library path*:
<General Info  Connectivity & Application>
4.4 Customizing System Components according to Customer Preferences
(1) Use the corresponding connectivity release documents and service manuals of
the system components for instructions how to customize the system
components.
4.5 Finalizing the Workstation Installation
(1) Finalize the workstation installation as described in NX Service Manual
Chapter 4, sections "NX Configuration via Configuration Tool" and "Completing
the Installation".
Edition 1, Revision 4 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 1 / Page 17 of 47
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential