AGFA CR Series - Adding Windows and NX Users

DD+DIS155
.11E
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
4.1 Adding Windows and NX Users
NOTE:
After NX activation the NX workstation has one service user “crservice” configured. The
CR 10-X / CR 12-X configuration wizard additionally installs a standard user “Agfa”.
The service user has Windows administrator rights as well as Service Engineer Rights
on NX.
If required, create additional users with NX operator rights.
Figure 6
Edition 1, Revision 4 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 1 / Page 11 of 47
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential