Positioning the radiographic table
There are two versions of the radiographic table:
• Fixed height radiographic table with a height of 70 cm
• Elevating radiographic table with adjustable height from 55 cm to 90 cm
The movements of the radiographic table are controlled by foot pedals
mounted at front side of the table.
WARNING:
Maintain visual contact with the patient while moving the
equipment close to the patient in order to detect hazardous
situations (e.g. collisions) early and to avoid them.
WARNING:
Make sure that no persons or objects are within the movement
area of the system where they can collide with moving parts of
the system.
Related Links
Collision protection on page 143
Collision indicator on page 135
Emergency stop button on page 32
Topics:
• Positioning the floating tabletop
• Adjusting height
136 | DR 400 | Radiographic Table and X-Ray Tube Stand
3231E EN 20210708 1530
To Next Page
Loading...
