Filter Status
On systems with automatic filtering, the filter is automatically set, based on
the selected exposure.
The filter setting can be modified on the software console or on the collimator.
• on the software console, click the filter status drop-down arrow and select
the filter from the list.
• on the collimator, use the filter button
Table 11: Collimator with automatic filter
(no icon)
No filter is used.
A filter is used. Material and thickness of the filter are speci-
fied.
Table 12: Collimator with manual filter
(no icon)
No filter is required.
A filter is required. Insert the filter manually.
DR 400 | Software Console and Tube Head Display | 111
3231E EN 20210708 1530
To Next Page
Loading...
