English
4
CONFORMITY STATEMENT
The Manufacturer
LASTRA ATTREZZATURE S.r.l.
Via Lombardia, 45
25025 Manerbio (BS) – Italy
Tel. +39 030 9937059 – Fax +39 030 9938105
DECLARES UNDER ITS OWN RESPONSIBILITY THAT THE FOLLOWING
PRODUCT
OFFSET PLATE PROCESSOR
Mod. :ELANTRIX 95 S / 125 S / 150 S
TO WHICH THIS STATEMENT REFERS, COMPLIES WITH THE
REQUIREMENTS OF THE FOLLOWING CEE REGULATIONS:
• MACHINE DIRECTIVE, 98/37/CEE (EX 89/392/CEE AND SUBSEQUENT
AMENDMENTS)
• ELECTROMECHANICAL COMPATIBILITY DIRECTIVE (EMC), 89/336/CEE AND
92/31/CEE AND 93/44/CEE
- EMISSION: EN 61000-6-3 (2001);
- IMMUNITY’: EN 61000-6-1 (2001); EN 61000-6-2 (2001);
• LOW VOLTAGE EQUIPMENT (LVD), CEE/73/23 AND CEE/93/68
- EN 60204-1 (1992);
Manerbio (BS),
LASTRA ATTREZZATURE S.r.l.
Managing Director
Carbonini Roberto
To Next Page
Loading...