Need help?Do you have a question about the AGFA Jeti Tauro H3300LED Series and is the answer not in the manual?
General| Print Technology | UV Inkjet |
|---|---|
| Max Print Resolution | 1200 x 1200 dpi |
| Print Speed | Up to 200 m²/h |
| LED UV Ink | Yes |
| Media Thickness | Up to 50 mm |
| Max Print Width | 3.3 meters |
| Ink Type | LED UV |
| Ink Colors | CMYK, White |
| Media Types | Rigid and flexible media |
| Media Handling | Roll-to-roll and flatbed |
| Connectivity | Ethernet |
| Application | Signage, packaging |
Explains safety symbols and their meanings for safe operation.
Guidelines for operating the printer safely, including training requirements and hazards.
Details the safety features designed to prevent operator injury during machine operation.
Describes immediate actions upon activation and procedures for system recovery.
Outlines chemical safety, handling, and first aid for inks and solvents.
Step-by-step guide for powering on and initializing the Jeti Tauro H3300LED printer.
Instructions for performing a purge and cleaning cycle for the printheads.
Details how to perform nozzle checks for colors, white, and primer.
Step-by-step guide for safely powering down the Jeti Tauro H3300LED printer.
Describes the process for performing zero point calibration, especially after mode changes.
Guide to verifying and adjusting job settings like head gap and UV intensity before printing.
Procedures for printing jobs in both manual and continuous modes.
Instructions for checking ink levels and refilling the ink supply systems.
Procedures for switching off the engine for short periods and power cycling.
Guidance on clearing system errors and recovering from interlock or collision errors.
Environment for viewing printer status messages and engine status.
Interface for managing print jobs, including lists, queues, and layout details.
To Next Page