7
If you insert or remove the card while the camera is powered on, it may damage
the card or data.
Do not touch the connection terminals on the back of the card.
About Camera Memory
This camera is equipped with an internal memory. If a memory card is not inserted in the
camera, all images and movie clips recorded by the camera will be stored in the internal
memory. If a memory card is inserted, images and movie clips will be stored on the
memory card.
Turning Power On & Off
Press the Power button (1) to turn on the
camera in the Capture mode. The power
turns on and the LED (2) lights red.
Press the Power button (1) again to turn the power off. The power turns off and
the LED turns off.
You can turn on the camera without the startup and operating sound by setting
the function [Play Logo] and [Buzzer].
Switch between Capture mode and Playback mode ( page 13).
Power Saving Function
To save battery power, the LCD monitor automatically turns off 30 seconds after the last
control accessed (factory-preset setting). Press any button other than the power button
to turn on the LCD monitor. After the power saving function has been active for the set
time, the power will turn off completely. Press the power button to power the camera
back on. You can change the power-off timeout by setting the function [auto power off
time] in the Setup menu.
C
C
a
a
u
u
t
t
i
i
o
o
n
n
1
T
T
i
i
p
p
s
s
2
To Next Page
Loading...
Need help?
General
