CMC INDUSTRIAL ELECTRONICS LTD
Phone: (604) 421-4425 Toll Free: (888) 421-4425 Fax: (604) 421-7734
www.cmciel.com sales@cmciel.com
1. Overview
The EZTest HazMon System Tester provides a simple method to diagnose CMC HazMon
systems.
The EZTest is handheld and operates off 2 AA batteries. It has an easy to read backlit LCD. A
simple 4 button operator interface is provided
The EZTest provides a standalone good/bad test for individual sensors. In addition, the
sensor’s electrical interface and real-time output can be verified. All information is presented in
scaled units to simplify the test results.
In addition to testing individual sensors, the EZTest can be connected to an active CMC
Intrinsically Safe network. The EZTest will supply a simply good/bad indication of the networks
operation. Further details of the networks electrical operating condition are also provided.
The EZTest can also emulate a sensor. A sensor is first attached to the EZTest and after the
serial number is captured the EZTest is attached to the network. The keyboard can then be
used to set any value for the sensor.
mVM001 Vibration Sensor, mTS017 Infrared Temperature Sensor, mCP001 Proximity
Capacitive Sensor, mIP001 Proximity Inductive Sensor, mDC001/2 Cable Sensor and
mPHT001 Pressure Humidity Temperature Sensor are configurable. The EZTest provides a
simplified means of configuring these sensors.
To Next Page
Loading...