7
DECLARATION OF CONFORMITY
According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
Manufacturer’s Name:
Manufacturer’s Address:
Agilent Technologies, Inc.
1900 Garden of the Gods Road
Colorado Springs, Colorado
80907 U.S.A.
Declares, that the product
Product Name: Digitizing Oscilloscope
Model Number: 54642D
Product Options: This declaration covers all options of the above product(s).
Conforms with the following product stardands:
EMC Standard Limit
IEC 61326-1:1997+A1:1998 / EN 61326-1:1997+A1:1998
CCISPR 11:1990/EN 55011:1991 Group 1 Class A
[1] [2]
IEC 61000-4-2:1995+A1:1998 / EN 61000-4-2:1995 4 kV CD, 8 kV AD
IEC 61000-4-3:1995/EN 61000-4-3:1995 3 V/m, 80-1000 MHz
IEC 61000-4-4:1995/EN 61000-4-4:1995 0.5 kV signal lines, 1 kV power lines
IEC 61000-4-6:1996/EN 61000-4-6:1996 3 V, 0.15-80 MHz
Canada: ICES-001:1998
Australia/New Zealand: AS/NZS 2064.1
Safety IEC 61010-1:1990+A1:1992+A2:1995 / EN 61010-1:1993+A2:1995
Canada: CSA C22.2 No. 1010.1:1992
Additional Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC
(including 93/68/EEC) and carries the CE-marking accordingly (European Union).
[1]
The product was tested in a typical configuration with Agilent Technologies test systems.
[2]
The product meets CISPR requirements using “type test” specified in IEC 61326-1 edition 1.1, section 3.1..
Date: 02/11/2002
Name
Ken Wyatt / Product Regulations Manager
For further information, please contact your local Agilent Technologies sales office, agent or distributor.
service.book Page i Wednesday, August 28, 2002 3:25 PM
To Next Page
Loading...
Need help?
General
