What to do if my Agilent Technologies 5530 shows no sensor readings?
If your Agilent Technologies Test Equipment displays no sensor readings, ensure that all sensors are correctly connected. Also, verify that Automatic Compensation is selected on the Set Up Environmental Compensation screen.
How to fix loss of beam strength in Agilent Technologies 5530?
If you're experiencing a loss of beam strength before the end of the travel path on your Agilent Technologies Test Equipment, examine the alignment of the optics and laser head. If necessary, clean the optics.
Why do measurement results drift on Agilent Technologies Test Equipment?
If the measurement results drift when the optics are at rest on your Agilent Technologies Test Equipment, ensure the optics and fixtures are tight. Minimize vibration and reduce the feed rate. Also, ensure the temperature of the optics is stable.
What to do if environmental data fluctuates on Agilent Technologies 5530?
If environmental data fluctuates during measurement with your Agilent Technologies Test Equipment, check the measurement path for heat sources or air ducts. If temperature fluctuations are not found, verify the accuracy of your sensors using the maintenance instructions.
General| Brand | Agilent Technologies |
|---|---|
| Model | 5530 |
| Category | Test Equipment |
| Language | English |
To Next Page
