Agilent Technologies 6050A User Manual

Remote Operation 73
140 OUTPUT 705; "TRIG:SOUR TIM"
150 END
Line 10: Selects channel 1 and turns the input off.
Line 20: Selects the CV mode.
Line 30: Sets the main voltage level to 5 volts.
Line 40: Sets the transient voltage level to 10 volts and the voltage slew rate to maximum.
Line 50: Selects toggled transient operation.
Line 60: Enables transient operation and turns on the channel 1 input.
Line 70: Selects channel 2 and turns the input off.
Line 80: Selects the CV mode.
Line 90: Sets the main voltage level to 10 volts.
Line 100: Sets the transient voltage level to 20 volts and the slew to maximum.
Line 110: Selects toggled transient operation.
Line 120: Enables transient operation and turns on the channel 2 input.
Line 130: Sets the internal trigger oscillator frequency to 2 kHz (period of pulses = 0.0005).
line 140: Selects the Multiple Electronic Load’s internal oscillator as the trigger source. The oscillator running as soon
as this line is executed.

Agilent Technologies 6050A Specifications

General

Brand	Agilent Technologies
Model	6050A
Category	Computer Hardware
Language	English