Agilent Technologies 86100C Programmer's Guide

1-28
Introduction
Command Syntax
The colon between CHANNEL1 and RANGE is necessary because CHANNEL1:RANGE spec-
ifies a command in a subsystem. The semicolon between the RANGE command and the OFF-
SET command is required to separate the two commands. The OFFSET command does not
need CHANNEL1 preceding it because the CHANNEL1:RANGE command sets the parser to
the CHANNEL1 node in the tree.

Agilent Technologies 86100C Specifications

General

Brand	Agilent Technologies
Model	86100C
Category	Test Equipment
Language	English