9GNEQOG
'2/27UGT U)WKFG
9GNEQOG
Welcome to the EPM-P series power meter User’s Guide!
Together with the E-series E9320 power sensors, the EPM-P series power
meters can measure complex modulation formats such as TDMA, CDMA
and W-CDMA. Pre-installed measurement setups for GSM900, EDGE,
NADC, iDEN, Bluetooth, cdmaOne, W-CDMA, and cdma2000 help reduce
the time required to measure these common wireless communications
formats.
Power measurements include peak, peak-to-average ratio and average
power of RF and microwave signals. Extensive triggering features such
as continuous, level, external TTL, and GPIB, are available for making
time gated measurements.
In addition, the EPM-P power meters are compatible with E-series E9300,
E-series 4410, and 8480 series power sensors giving you additional choice
for conventional, average power measurements.
E4416-90023.book Page 6 Thursday, August 9, 2001 9:17 AM
To Next Page
Loading...
Need help?
General
