Hardkey and Softkey Reference ESG Family Signal Generators
Utility
4-140 User’s Guide
The error queue can contain up to 30 error messages. When the front
panel error queue overflows, error messages are deleted beginning with
the oldest ones first. When the SCPI error queue overflows, newer error
messages are not recorded.
You can scroll through the error messages in reverse order. Refer to the
View Previous Error Message softkey description.
Softkey Location:
Utility > Error Info > View Next Error Message
View Previous Error Message
If the ERR annunciator is turned on in the display, you have at least one
error message stored in the error message queue. Use this softkey to
display the newest error message first. Continue pressing this softkey
to view additional error messages in order of newest to oldest. Press any
front panel key to remove the error message from the display and
return to normal signal generator operation.
Softkey Location:
Utility > Error Info > View Previous Error Message
WCDMA
Press this softkey to set the current catalog type to WCDMA and
display the catalog of WCDMA files.
Softkey Location:
Utility > Memory Catalog > Catalog Type >
ARB Catalog Types > WCDMA
White Pixels Screen Test
This softkey is provided for factory use in testing the display. Pressing
this softkey sets all of the pixels on the display to white. Pressing the
front panel Local key returns the display to normal operation.
Softkey Location:
Utility > Display > White Pixels Screen Test
To Next Page
Loading...
Need help?
General
