ESG Family Signal Generators Hardkey and Softkey Reference
Utility
User’s Guide 4-131
Ref Osc Fine
This softkey is provided for adjusting the internal reference oscillator.
This adjustment is for use by service personnel only. Refer to the
calibration guide for information.
Softkey Location:
Utility > Instrument Adjustments >
Reference Oscillator Adjustment > Ref Osc Fine
Remote Language
Pressing this softkey reveals a menu of choices for immediately
changing the signal generator’s remote language. You can choose
between SCPI, which is the language chosen for the signal generator for
remote implementation of all features, 8648-compatible, and four
versions of 8656/57-compatible languages. The 8648- and
8656/67-compatible languages are provided for remote implementation
of some features so that this signal generator can be compatible with
systems that use those instruments. Refer to the programming guide
for specifics on which commands are implemented.
Default Value: Depends on the value of the Preset Language.
Softkey Location:
Utility > GPIB/RS-232 > Remote Language
Rename File
Press this softkey to rename a file in the displayed catalog of files. The
following text explains how to use the file name editor:
•The
Editing Mode Insert Replace softkey in the Editing Keys menu
toggles the editing mode from inserting text to replacing text.
Insertion mode causes text to be entered in the position directly to
the right of the cursor. Replacement mode causes the text to be
entered in the position held by the cursor (replacing any existing
text in that position).
•The
Clear Text softkey in the Editing Keys menu deletes all of the
existing text in the active entry area.
• Use the left and right arrow keys to position the cursor. Use the front
panel knob, or the direct editing softkeys, to enter an alphabetic
character, numeral, or special character.
When you have entered the new file name, press the
Enter terminator
softkey. If you have changed your mind, press the
Return hardkey. Once
you press
Enter, the new file is stored and displayed immediately in the
catalog list.
Softkey Location:
Utility > Memory Catalog > Rename File
To Next Page
Loading...
Need help?
General
