Agilent Technologies E4438C User's & Service Guide

User’s and Service Guide 3
E4438C Option SP2
User Interface
The strobe also controls the start of play of the next segment. Start of play can be selected
immediately after the current segment has been completed or on the falling edge of the
strobe signal. This is a notional Trigger Hold-Off control and provides a means of strobing
in the next segment index and then waiting for the length (pulse-width) of the strobe
signal before beginning to play the next segment.
User Interface
Typeface Key Conventions
The following key conventions are used throughout this document.
• [HARDKEYS] are labeled front panel keys
• SOFTKEYS are unlabeled key whose function is indicated on the instrument display
Keyboard and Display
From the ARB Trigger menu, Segment Advance will be selected as before. A further
selection of Trigger Setup will lead to new selections as detailed below.
To set up Dynamic Segment Switching:
Select ModeDual > ARB> Trigger > Segment Advance
Select ModeDual > ARB> Trigger > Setup > Segment Advance Mode > Continuous

Agilent Technologies E4438C Specifications

General

Brand	Agilent Technologies
Model	E4438C
Category	Portable Generator
Language	English