Agilent Technologies E4438C Installation Note

3
ESG Vector Signal Generator E4438C
Add Option 005(Internal Hard Drive)
Kit Part Number E4400-60599
Introduction
This upgrade kit adds Option 005, Internal Hard Drive, to the E4438C.
NOTE This upgrade kit requires that Option 001, 002, 601, or 602 be already installed in the signal generator.
Installation includes the following major steps:
1. Check signal generator operation.
2. Remove the instrument covers.
3. Remove the front panel. (For instruments with serial prefix numbers <US4426/MY4426.)
4. Install the Internal Hard Drive, Option 005.
5. Obtain Option 005 license key (For instruments with serial prefix numbers >
US4426/MY4426.)
6. Re-install the front panel. (For instruments with serial prefix numbers <US4426/MY4426.)
7. Verify installation of Option 005.
8. Re-assemble the signal generator.
9. Perform a functionality test on the signal generator.
Product Affected: . . . . . . . . . . . . . . . . . . . . . . . . . E4438C
Serial Numbers: . . . . . . . . . . . . . . . . . . . . . . . . . . All
Options: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To Be Performed By: . . . . . . . . . . . . . . . . . . . . . . (X) Agilent Technologies Service Center
(X) Personnel Qualified by Agilent Technologies
(X) Customer
Estimated Installation Time: . . . . . . . . . . . . . . . 1.0 hours
Estimated Verification Time: . . . . . . . . . . . . . . . 0.1 hours

Agilent Technologies E4438C Specifications

General

Brand	Agilent Technologies
Model	E4438C
Category	Portable Generator
Language	English