Agilent Technologies E4438C Installation Note

4
Installation Kit Parts List
IMPORTANT If the Agilent Service Center orders the Option 005 hard drive m kit using the 5x5 part number, then they
must contact Agilent and order the entitlement certificate.
Tools Required
•TORX T-10 driver
•TORX T-15 driver
•TORX T-20 driver
• Long-nose pliers
• Scissors
Item Quantity Description Part Number
11
Installation Note
a
a. This item cannot be ordered separately.
E4400-90551
2 8 Insulated Bushing 0340-1525
3 4 Screw SMM 3.0 12 CWPNTX 0515-0664
44
Screw SMM 3.0 14 PNTX
a
0515-0681
5 1 Hard Drive Mount (serial prefix numbers < US4426/MY4426) E4400-00526
6 1 Tested Hard Drive E4400-60253
7 1 Ribbon Cable (installed on hard drive) 8121-0685
8 1 Label 7120-1232
The following items are required for signal generators with serial prefix numbers ≥ US4426/MY4426
9 1 Hard Drive Mount E4400-00547
10 1 Entitlement Certificate 5964-5143
11 1
Entitlement Certificate
b
b. Must be ordered separately if installed by the Agilent Service Center.
5964-5143

Agilent Technologies E4438C Specifications

General

Brand	Agilent Technologies
Model	E4438C
Category	Portable Generator
Language	English