3-3
Safety and Regulatory Information
Regulatory Information
Servicing
WARNING These servicing instructions are for use by qualified personnel only.
To avoid electrical shock, do not perform any servicing unless you
are qualified to do so.
WARNING No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.
WARNING The opening of covers or removal of parts is likely to expose
dangerous voltages. Disconnect the product from all voltage sources
while it is being opened.
WARNING The power cord is connected to internal capacitors that may remain
live for 5 seconds after disconnecting the plug from its power supply.
Regulatory Information
This section contains information that is required by various government regulatory
agencies.
Instructions for Use
This product has been designed and tested in accordance with the standards listed on the
Manufacturer’s Declaration of Conformity, and has been supplied in a safe condition. The
documentation contains information and warnings that must be followed by the user to
ensure safe operation and to maintain the product in a safe condition.
Install the instrument so that the detachable power cord is readily identifiable and is
easily reached by the operator.
The detachable power cord is the instrument disconnecting device. It disconnects the
mains circuits from the mains supply before other parts of the instrument. The front
panel switch is only a standby switch and is not a LINE switch (disconnecting
device).
Alternatively, an externally installed switch or circuit breaker (which is readily
identifiable and is easily reached by the operator) may be used as a disconnecting device.
To Next Page
Loading...
Need help?
General
