Revision number
The test definitions are managed by using the revision number shown below.
NOTE
Application Library
The application library is a set of test definitions effective for the EasyEXPERT application
test execution mode. The application test can be performed by selecting a test definition
and setting the test condition for the actual DUT (device under test). And the setup can be
saved as the dedicated test setup for the DUT.
All test definitions are just sample. If the samples damage your devices, Agilent
Technologies is NOT LIABLE for the damage.
NOTE
If you delete a test definition
Application library should be recovered. Import the test definition by using the Import Test
Definition... function of the Library button. The original test definitions are stored in the
following folders.
<program folder>\Agilent\B1500\EasyEXPERT\Application Tests
<program folder>\Agilent\B1500\EasyEXPERT\Contribution\Application Tests
Revision Number Description
A.01.xx Test definitions supported by EasyEXPERT A.01.xx and later.
A.01.20 Test definitions updated from A.01.xx or supported by
EasyEXPERT A.02.00 and later.
A.02.00 This number is used by the Subsite move test definition only.
A.03.00 Test definitions supported by EasyEXPERT A.03.00 and later.
A.03.10 Test definitions supported by EasyEXPERT A.03.10 and later.
A.03.11 Test definitions supported by EasyEXPERT A.03.11 and later.
A.03.20 Test definitions supported by EasyEXPERT A.03.20 and later.
A.04.00 Test definitions supported by EasyEXPERT A.04.00 and later.
A.05.00 Test definitions supported by EasyEXPERT A.05.00 and later.
A.05.01 Test definitions supported by EasyEXPERT A.05.01 and later.
A.05.02 Test definitions supported by EasyEXPERT A.05.02 and later.
A.05.03 Test definitions supported by EasyEXPERT A.05.03 and later.
A.05.50 Test definitions supported by EasyEXPERT A.05.50 and later.
To Next Page
Loading...
Need help?
General
