1 Introduction
16 U2000 Series Operating and Service Guide
Figure 1-8 Found New Hardware Wizard driver installation
5 A warning message will appear in the Hardware Installation window, as
shown below. Click Continue Anyway to proceed with the installation of the
driver.
Figure 1-9 Hardware installation warning message
If you do not wish to receive similar warning message in future, follow the instructions below.
1 Go to Start > Control Panel and double-click System.
2 Select Hardware tab, on the Drivers panel click Driver Signing and the Driver Signing Options
dialog box will appear.
3 Select Ignore to disable the warning message.
To Next Page
Loading...
Need help?
General
