9
SPECIFICATIONS
INPUT POWER:
12 or 24 VDC Operation.
Negative Ground.
Nominal 10 Amp Minimum Current Requirement.
20 Amp Maximum with Auxiliary Outputs.
Note: 12 VDC Mast Motor and Solenoid Valve Coils are Standard.
Specify 24 VDC if Required.
OUTPUT POWER:
5 Amp Maximum per Valve Solenoid or Mast Drive.
2.5 Amp Maximum if Signal Duration Exceeds Two (2) Minutes.
.1 Amp Maximum Output During Short Circuit Condition.
TEMPERATURE:
-20 to 70 Degrees C
To Next Page
Loading...