3
1
2
1
Identify the smaller blind light panel
71E and bring it around to the rear
left corner of the upper deck.
2
Carefully lift the upper deck slightly, so
that you can slip the light panel 71E in
between the outer wall framework 86A and
the ceiling framework 70A. Ensure that the
backing paper is facing away from you.
3
Bring the cable up behind the
framework 86A (circled). Bring the
LED panel 71E through the opening so
that it hangs down in front of the
framework 86A. It is advisable to
temporarily secure the panel in place with
a piece of low-tack tape.
86A
86A
71E
71E
78C
70A
70A
71E
14
14
AGORAMODELS ROUTEMASTER BUS
15
AGORAMODELS ROUTEMASTER BUS
To Next Page
Loading...
