5
On the inside of the platform, using long
tweezers, manoeuvre hand rail 84H to fit
into handrail 60D.
6
Position the roof panel 97C
on the top of the model,
over the upper deck ceiling frame
89A, as shown here.
5
6
7
7
Position the front strip 97D around the
lower front edge of the roof panel 97C,
checking that it is central and the screw holes
are aligned. The ends of the strip will be bent
around the sides of the roof, but do not bend
the strip until it has been fixed in place across
the front of the bus (see step 8).
97C
89A
60D
84H
97D
97C
38
38
AGORAMODELS ROUTEMASTER BUS
To Next Page
Loading...
