AGPtek DC2R User Manual

DC2R Remote Training System With LCD display and of 300 meters range
◎Controller
Features :
1.100 levels of vibration.
2.100 levels of shock(optional).
3.The levels can be altered by use of up & down button.
4.A tone button activates a tone on the receiver collar.
5.The system can be used for 1 or 2 receivers’ collars.
6.Four modes --shock, vibration, light and beep mode, meet your different training needs.
7.300 meters usage range in open areas.
8.Power saving design: the controller enters sleep mode after 20s of no operation, and wakes up by
pressing MODE for 1s; the receiver enters sleep mode after 20s no movement, and wakes up when
moving.

AGPtek DC2R Specifications

General

Brand	AGPtek
Model	DC2R
Category	Pet Care Product
Language	English

Summary

Features

100 Levels of Vibration and Shock

Offers 100 levels of vibration and optional shock, adjustable via UP/DOWN buttons.

Tone Button and Multi-Receiver Support

Features a tone button and supports 1 or 2 receiver collars for training flexibility.

Four Training Modes and Range

Includes shock, vibration, light, and beep modes with a 300-meter range.

Power Saving Design

Controller and receiver enter sleep mode to conserve power, waking on user input/movement.

Getting Charge

Controller Charging Procedure

Connect charger to controller's jack; charge for at least 6 hours until red LED turns off.

Receiver Collar Charging Procedure

Connect charger to collar; charge for at least 6 hours until red LED turns off.

How to Match Controller and Collar

Matching the First Collar

Turn on controller, select Channel 1, press reset button on collar for 5s to pair.

Matching the Second Collar

Select Channel 2, press collar reset button for 5s, then press controller Y button to pair.

Intensity Regulation

Using The Four Models

Shock Model Operation

Test shock function with bulb; use appropriate contact columns for dog's fur length.

Vibration Model Operation

Select vibration mode and press Y button; collar vibrates to indicate function.

Beep Model Operation

Select beep mode and press Y button; collar emits a beep sound.

LED Light Model Operation

Select LED light mode; press Y button to flash collar and controller indicator lights.

Package Includes

Notes for Function

Training Tips

Initial Collar Use and Attachment

Read instructions, ensure functions are working, then attach collar to dog's neck.

Practice and Command Reinforcement

Start with low stimulation, observe dog response, and reinforce commands with praise/treats.

Controlling Bad Behavior

Use collar for specific behaviors, set low stimulation, and activate discreetly.

Training Session Guidelines

Keep sessions positive, short (10-15 mins), avoid leaving collar on for >12 hours.