AGRI-COVER Access - Mounting Cover to Side Rails

8 9
5: MOUNTING COVER TO SIDE RAILS
A. Set cover at front of box on side rail
(behind cab) with front bar facing up.
B. Roll front bar onto front side rails and fold/
tuck vinyl ap under front bar. Now, front bar
will face down. Let straps hang inside of box.
Push front bar forward until it sets at on
front of side rails and extends past them.
C. Slide left tension adjuster until it engages
under side rail (see Step 5F). Push bar
back and forth to line up holes. Do not turn
adjustment wheel. Insert bolt from top then
secure with washer and nut from bottom.
Insert bolt
from top
D. Hold bolt at top and tighten nut under side
rail. Repeat Step 5C and 5D for right tension
adjuster.
Hold bolt
Tighten nut