FINISHING MOWER ASSEMBLY INSTRUCTIONS
Step 1
Attach the rear brace bars to the lugs on the rear of the deck with an M12 bolt and locking nut.
Attach the A-frame bars to the lugs on the front of the mower deck with M12 bolts and locking nuts.
(See below fig. 1 & fig. 2)
Step 2
Connect all braces at the top of the A-frame with an M12 bolt, spacer, hitch configuration and locking nut.
(See Fig. 3)
Fig. 1
Fig. 3
Fig. 2
11
BE-FMxRDG
To Next Page
Loading...
