AGRI EASE BE-FM60RDG - Finishing Mower Assembly Instructions (Continued); Step 3: Install Wheel Support Braces; Step 4: Install Discharge Chute and Chains; Step 5: Adjust Cutting Height

FINISHING MOWER ASSEMBLY INSTRUCTIONS
Step 3
Install the wheel support braces with M12 bolts and locking nuts. (See fig. 4)
Step 4
Install rear discharge chute and safety chains using M12 bolts and locking nuts. (See fig. 5)
Step 5
Adjust the height of the mower deck by
installing spacers (A, B, or C) on the bottom of the
wheel assembly shaft (2) before inserting into axle arm (3).
(See fig. 6)
Fig. 4
Fig. 5
Fig. 6
12
BE-FMxRDG