EasyManua.ls Logo

AGV K6 User Manual

AGV K6
44 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
K6
USER MANUAL
Question and Answer IconNeed help?

Do you have a question about the AGV K6 and is the answer not in the manual?

AGV K6 Specifications

General IconGeneral
Shell MaterialCarbon-Aramid Fiber
Retention SystemDouble D-ring
Sizes AvailableXS, S, M, L, XL, XXL
VisorAnti-scratch
Ventilation5 front vents
Inner LinerRemovable and washable
Safety StandardECE 22.05

Summary

Product Support Documentation

Lettering and Symbols

Explains specific prescription and precautionary measures, and information for better execution of tasks.

Introduction to K6 Helmet

Use and Safety Destination

Specifies the K6 helmet is engineered for motorcycle use only and not for other purposes.

Components

Lists and illustrates all the components of the K6 helmet with their corresponding numbers.

The Visor

Working Positions

Details the five different positions the visor can be set to, including safety advice.

Micro-Opening

Explains how to set the visor to a micro-opening position for moderate airflow.

Removal

Step-by-step guide on how to remove the visor from the helmet mechanism.

Installation

Step-by-step guide on how to install the visor back onto the helmet mechanism.

Cleaning

Instructions for cleaning the visor, including warnings about unsuitable cleaning agents.

The Anti-Fog Lens of PinlockĀ® Brand

Installation

Instructions for installing the Pinlock anti-fog lens onto the visor.

Removal

Instructions for removing the Pinlock anti-fog lens from the visor.

Cleaning

Guidance on how to clean the Pinlock lens, with warnings about cleaning agents.

The Cheek Pads

Removal

Step-by-step guide on how to remove the cheek pads from the helmet.

Installation

Step-by-step guide on how to install the cheek pads back into the helmet.

The Crown Pad

Removal

Instructions for removing the crown pad from the helmet.

Installation

Instructions for installing the crown pad into the helmet.

The Wind Protector

Removal

Instructions for removing the wind protector from the helmet.

Installation

Instructions for installing the wind protector into the helmet.

The Rescue Pull System

Activation

Explains how to activate the Rescue Pull System for emergency cheek pad removal.

The Breath Deflector

Removal

Instructions for removing the breath deflector from the helmet.

Installation

Instructions for installing the breath deflector into the helmet.

The Chin Strap Cover

Removal

Instructions for removing the chin strap cover.

Installation

Instructions for installing the chin strap cover.

The Air Vents

Front Vents

Explains how to operate the front air vents on the helmet.

Chin Vents

Explains how to operate the chin air vents on the helmet.

The Retention System

Closure

Instructions on how to properly close and tighten the helmet's retention system.

Opening

Instructions on how to open the helmet's retention system.

Lubricating Oil for Visor Mechanism

Related product manuals