Need help?Do you have a question about the AGV Tourmodular and is the answer not in the manual?
General| Safety Standard | ECE 22.05 |
|---|---|
| Type | Modular Helmet |
| Shell Material | Carbon-Aramid-Fiberglass |
| Interior | Removable and Washable |
| Visor | Pinlock Ready |
| Weight | 1620 g in first shell size |
| Sun Visor | Integrated |
| Retention System | Micrometric Retention System |
| Communication System | Ready for AGV communication system |
| Ventilation | Adjustable air vents (5 front, 1 rear) |
Defines specific terminology and symbols used in the manual for clarity and safety.
Lists accessories provided with the helmet upon purchase, ensuring all parts are present.
Provides information on optional accessories available for purchase and where to find them.
Details the AGV Insyde intercom device and its integration with the helmet.
Details external parts of the helmet, including visor, chin guard, ventilation, and mechanisms.
Details internal parts like padding, retention systems, and attachment points.
Instructions for opening and closing the chin guard of the helmet.
Describes the different working positions for the chin guard while riding.
Covers opening, closing, and various operating positions including micro-opening for the helmet visor.
Provides instructions for removing, installing, and adjusting the helmet visor for proper function.
Explains how to operate and adjust the sun visor, including its usage conditions.
Provides step-by-step instructions for removing and installing the sun visor.
Step-by-step guide for fitting the Pinlock® anti-fog lens into the visor.
Instructions on how to safely remove the Pinlock® anti-fog lens from the visor.
Information regarding the tensioning process for the Pinlock® lens.
Detailed procedure for removing the cheek pads from the helmet.
Instructions for correctly installing the cheek pads into the helmet.
Procedure for detaching the crown pad from the helmet's interior.
Steps for properly fitting the crown pad into the helmet.
Guide on how to install and remove the wind protection component.
Instructions for installing and removing the nose guard on the helmet.
Details on operating the upper air intake vents for ventilation.
Instructions for operating the chin guard's air intake vents.
To Next Page
