Need help?Do you have a question about the AGV BLADE and is the answer not in the manual?
General| Ventilation | Adjustable air vents |
|---|---|
| Inner Lining | Removable and washable |
| Finish | Glossy |
| Shell Material | Thermoplastic |
| Visor | Scratch resistant |
| Weight | 1500 g in first shell size |
Details the basic screw and bayonet connection mechanism used to attach the visor.
Describes the visor's non-scratch polycarbonate material and its collar's hook-up inserts for stability.
Provides step-by-step instructions for detaching and reattaching the helmet visor.
Describes the helmet's front air vents and side air extractors.
Instructions on how to use the cursors to open or close the helmet's air vents.
Guide to removing and installing the crown pad, cheek pads, and neck roll.
Step-by-step instructions for removing and refitting cheek pads using Velcro.
Instructions for removing and refitting the crown pad using press-studs and Velcro.
Procedure for removing and installing the padded neck roll via its zip fastener.
Guide to detaching and reattaching the fabric neck roll using zip and Velcro.
Instructions for removing and refitting the helmet's throat cover using Velcro.
Lists the three types of helmet retention systems: DD, Quick Release Buckle, and Micrometric.
Details on how to fasten and release the DD ring retention system for secure helmet fit.
Instructions for adjusting, fastening, and releasing the quick release buckle.
Guide to adjusting, fastening, and releasing the micrometric buckle for precise fit.
Illustrates different helmet configurations using various visor and top shell accessories.
Procedure for removing and attaching the short top shell peak to the helmet.
Instructions for removing and fitting the long peak onto the helmet.
Guide to fitting the long peak along with the visor onto the helmet.
To Next Page
