Need help?Do you have a question about the AGV Pista GP RR and is the answer not in the manual?
General| Shell Material | 100% Carbon Fiber |
|---|---|
| Retention System | Double D-ring |
| Weight | 1, 450 g in first shell size |
| Ventilation | 5 front vents, 2 rear extractors |
| Visor | 5mm thickness |
| Safety Standard | ECE 22.05 |
| Interior | Removable and washable padding |
Defines symbols used in the manual for prerequisites, actions, and warnings.
Lists standard accessories included with the helmet.
Mentions information source for aftermarket accessories and compatibility.
Describes the different positions for using the visor (closed, micro-opening, open).
Step-by-step instructions for removing the helmet visor.
Step-by-step instructions for installing the helmet visor.
Explains how to use the micro-opening feature for moderate airflow.
Instructions for adjusting the visor fastening mechanism.
Step-by-step guide for applying tear-offs to the visor.
Instructions for removing tear-offs from the visor.
Step-by-step instructions for installing the Pinlock lens.
Step-by-step instructions for removing the Pinlock lens.
Refers to an external document for pretensioning the Pinlock lens.
Step-by-step instructions for removing the cheek pads.
Step-by-step instructions for installing the cheek pads.
Steps for removing and installing the crown pad using snap buttons.
Steps for removing the wind protection by detaching plastic hooks.
Steps for installing the wind protection by inserting plastic hooks.
Step-by-step guide for installing the hydration system components.
Steps for removing the noseguard by releasing connection teeth.
Steps for installing the noseguard by hooking connection teeth.
Steps to activate the Rescue Pull System for cheek pad removal.
Instructions for applying and removing closing strips for upper air intakes.
Instructions for opening and closing the lower air intakes using a slider.
Steps for removing and installing the pro spoiler using screws.
To Next Page
