Ahlborn ALMEMO 710 Quick Start Guide

www.ahlborn.com
Quick start guide
ALMEMO
®
710
22.31 °C
Measured value
50.7 %H
Limit value overshot red
35.9 %H
Limit value undershot blue
10000 g/kg
OVERRANGE
Outside of measuring range
----- ---
BREAK
Sensor breakage
----- ---
U-LOW
Sensor voltage too low
----- ---
Red triangle -
further menus available
------- %H
Parameters can be -
but are not yet - programmed
45,0
%H
Parameters can be -
and are already - programmed
Units
Blue triangle -
help text available
Measured value smoothed
REL
Relative to reference value
Measured value corrected
or scaled
M
Averaging in progress
D H L M A
Output function
Diff, Hi, Lo, M(t), alarm
CT CT
Temperature compensation
fixed, measured
CP CP
Atm. pressure compensation
fixed, measured
Rechargeable battery status
full / almost empty / being charged
Memory status empty / almost full
ON-OFF
Press and hold down
the ON / OFF switch
HOTKEY
Call up desired menu;
Press and hold down: save menu
HOME
Call up home menu
Start
Start the meas. operation; pro-
gramming is no longer possible
Stop
Stop the measuring operation
Manual
Manual measuring
Settings
Call up local menu
Clear memory
Call up a function
Activate a function
ON OFF
Switch the function ON / OFF
Select channel
Selection box
1/4 Page back / forward
Keyboards
KeysList of parameters
mbar
°C
%rF
m/s
Co
2
g/m
3
g/kg
dt
lux
Pa
mbar
Hz
%H
mbar
°C
%rF
m/s
Co
2
g/m
3
g/kg
dt
lux
Pa
mbar
Hz
%H
mbar
°C
m/s
lux
Pa
%H
mbar
°C
%rF
%rF
m/s
Co
2
g/m
3
g/kg
dt
lux
Pa
mbar
Hz
%H
%H
Ahlborn Mess- und Regelungstechnik GmbH
Eichenfeldstr. 1 • 83607 Holzkirchen • Germany

Ahlborn ALMEMO 710 Specifications

General

Data Logger	Yes
Display	LCD display
Interface	USB, RS232
Power Supply	Battery or external power supply
Input Types	Voltage, current, resistance, temperature
Measurement Range	Depends on sensor used
Accuracy	Depends on sensor used
Resolution	Depends on sensor used
Sampling Rate	Up to 10 Hz