Need help?Do you have a question about the Ahuja BTZ-7000 and is the answer not in the manual?
Alerts to uninsulated hazardous voltage and component replacement warnings.
Covers safety measures for water, power source, ventilation, and cleaning.
Highlights the amplifier's capabilities, zone operation, and input options.
Identifies and describes all controls and indicators on the front panel.
Details all input/output terminals and rear panel controls.
Explains amplifier placement, power, and connection procedures with a diagram.
Guides direct speaker connections to 4Ω/8Ω terminals with examples.
Details connecting speakers using 100V Line Matching Transformers.
Explains 70V line benefits and correct loudspeaker phasing for optimal sound.
Illustrates setting up an 1100W stereo system using TZA-4000EM.
Shows how to connect a DJ mixer for audio playback.
Describes implementing a multi-zone paging system with TZA-4000EM.
Details creating a high-power stereo system using SPA-5000EM boosters.
Explains setting up a high-power mono system with BR-250M boosters.
Provides detailed technical data for power, inputs, outputs, and dimensions.
General| Frequency Response | 50Hz-15kHz ±3dB |
|---|---|
| Signal-to-Noise Ratio | 60dB |
| Power Output | 700 Watts RMS at 10% THD |
| Input Impedance | 10kΩ |
| Output Taps for Speaker Matching | 70V, 100V |
| Tone Controls | Bass, Treble |
| Power Supply | AC: 220-240V 50/60Hz |
| Input Sensitivity | Mic 1mV |
To Next Page
