Ahuja SSA-1000 User Manual

SSA-10000
PA AMPLIFIERS
l
l Please read this manual thoroughly before making connections and turning on the power. Following
the instructions in this manual will enable you to obtain optimum performance from your new
AHUJA PA Amplifier.
l Please retain this manual for future reference.
Thank you for purchasing the AHUJA PA Amplifier.
OPERATION MANUAL
OPERATION MANUAL
1000W RMS/1350W Max.
®

Ahuja SSA-1000 Specifications

General

Brand	Ahuja
Model	SSA-1000
Category	Amplifier
Language	English

Summary

Safety Instructions

Warning and Cautions

User safety warnings and precautions regarding electrical shock, water exposure, and proper operation.

Features and General Description

Front Panel Controls and Features

Rear Panel Controls and Features

Interconnections

Speaker Connection Guidelines

Low Impedance Speaker Connections

Guidelines for connecting box-type speakers directly to the amplifier's low impedance terminals.

Connecting Eight SAX-150DX Speakers

Wiring instructions for eight SAX-150DX speakers in parallel-series for 4-ohm impedance.

Connecting Ten SRX-120DX Speakers

Wiring instructions for ten SRX-120DX speakers in parallel-series for 3.2-ohm impedance.

Connecting Four SAX-300DX Speakers

Wiring instructions for four SAX-300DX speakers in parallel for 2-ohm impedance.

High Impedance Speaker Connections

Connecting Three SRX-500 Speakers

Wiring instructions for three SRX-500 speakers in parallel for 2.66-ohm impedance.

100V Line Matching Transformer Guidelines

Guidelines for connecting speakers or driver units using 100V Line Matching Transformers.

Connecting Seventy Driver Units with 100V LMT

Instructions for operating seventy driver units with 100V LMT at 10 Watts tap.

Connecting Driver Units and Column Speakers with 100V LMT

Guidelines for combining driver units and column speakers with 100V LMT.

Typical Applications

Connecting Cassette Player and Booster Amplifier

System setup for a 1500W mono system using a cassette player and booster amplifier.

Connecting Multiple Booster Amplifiers

System setup for a 3000W mono system using one master amplifier and four boosters.

Specifications