Aideepen TC-T7-H User Manual

Email:sales@aideepen.com
Multi-function Tester (TC-V2.12k)
1 Overview
1.1 Introduction
1 - 128x128 TFT display
② - Multi function key
③ - Transistor test area
④ - Zener Diode test area
⑤ - IR receiver window
⑥ - Micro USB Charging Interface
⑦ - Charge indicator LED
1.2 Features
TC-T7-H is a TFT graphic display Multifunction Tester.
 Transistor Tester
- Automatic detection of NPN and PNP bipolar transistors, N-channel and P-channel MOSFETs,
JFETs, diodes (including double diodes), N- and P-IGBTs, resistors (including potentiometers),
inductors, capacitors, thyristors, triacs and battery (0.1-4.5V)
- Automatic detection of zener diode（0.01-20V）
- Self test with automatic calibration
 IR decoder
- Support Hitachi IR coding
- IR waveform display
- Infrared receiving instruction
 Other
- Measurement results using TFT graphic display(128x128)
- One key operation
- Auto Power Off(Timeout Settable)
- Built-in high capacity rechargeable Li-ion Battery
- Li-ion Battery voltage detection
- Support English

Aideepen TC-T7-H Specifications

General

Model	TC-T7-H
Category	Test Equipment
Diode Test	Yes
Transistor Test	Yes
Thyristor/Triac Test	Yes
Inductor Test	Yes
Resistor Test	Yes
Capacitor Test	Yes
Power Supply	Rechargeable lithium battery
Charging	Micro USB
Display	1.8-inch TFT
Type	Tester

Summary

Overview

Introduction

Introduces the Multi-function Tester TC-V2.12k, highlighting its TFT display.

Features

Lists key features including transistor testing, IR decoding, and other functionalities.

Operating Instructions

Key Operational Definitions

Defines key operational terms like short press and long press for the multifunction key.

Power On and Interface

Explains how to turn on the tester using the multifunction key and shows the power-on interface.

Detect Transistor

Details the process of inserting a component into the test area and initiating measurement.

Selftest and Calibration

Describes the self-test and calibration procedure for the tester.

Detect Zener Diode

Explains how to test Zener diodes using the dedicated test area.

IR Decoder Operation

Details the process of using the IR decoder function and interpreting results.

Power Off Modes

Explains both automatic and manual power-off procedures for the tester.

Battery Voltage Measurement

Describes how the tester measures and displays the Li-ion battery voltage.

Charging the Battery

Provides instructions for charging the tester's built-in Li-ion battery via USB.

Performance Parameters

FAQ

Packing List