AILE FC-BP131 - Device Features Overview; How to Take a Measurement; Starting the Measurement

12
2.7 Take a Measurement
2.7.1 Press the “ ” button.
All display symbols appear on the screen. The cuff starts to
inflate automatically.
2.6 Function
2.6.1. The device has the WHO warning strip “ ” symbol display
function, with the blood pressure value change, the higher blood
pressure value “ ” symbol will appear relatively in the higher position
(refer to WHO definition of high blood pressure levels-reference table).
2.6.2. The device has the average of the last three display function
(press the memory key for the first time to display the value that is the
average of the last three measurements).
2.6.3. The device has a large screen display and value.
2.6.4. The device has kPa and mmHg display switching and
measurement functions.
2.6.5. The device has double memory lookup function and can store
120 sets of measurements for each person to remember the normal
status of your blood pressure.
2.6.6.Low power detection: detecting low power under any working
state, LED displays “ ” symbol indicates low power.
2.6.7. Overpressure protection function: when the pressure is more
than 300mmHg, the device cause automactic power consumption
fastly.
2.6.8. Automatic shutdown function: no operation for 2 minutes the
device will be shut down automatically.
2.6.9. Heartbeat prompting function.
2.6.10. Measurement completed prompting function.
2.6.11. Incorrect prompting function.
RATED ranges of the DETERMINATION：
Cuff pressure: 0-299 mmHg
SYS: 45-255 mmHg
DIA: 24-216 mmHg