AILE X5 - User Manual

AILE X5 blood pressure monitor time setting
Install the batteryNote: Each time you change the
battery the time will go to zero. All need to reset the
time.
Press and hold the SET button for 3 seconds. The year
appears in the top right corner (flashing).Be careful
not to press other keys before pressing SET.
1 2
Phone: +1 888-875-0846 Website: 4aile.comE-mail: help@4AILE.COM

Summary

AILE X5 Blood Pressure Monitor Time Setting

Battery Installation and Initial Setup

Instructions for installing batteries and pressing SET to begin time setting. Notes battery replacement resets time.

Setting the Year

Guide on using MEM to adjust the flashing year to the current year, with notes on adjustment limitations.

Setting the Month

Instructions for setting the current month using SET and MEM buttons after the year is configured.

Setting the Date

Details on setting the current date using the SET and MEM buttons following month configuration.

Setting the Hour

Guide to setting the current hour using SET and MEM buttons after the date has been adjusted.

Setting the Minutes

Instructions for setting the current minutes using the SET and MEM buttons after the hour is configured.

Finalizing Time Setting and Measurement

Completing time setting with SET and starting a measurement with automatic time stamping.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The AILE X5 is a blood pressure monitor designed for home use, providing users with the ability to track their blood pressure and pulse readings over time. This device is characterized by its user-friendly interface and straightforward time-setting procedure, which is crucial for accurate data logging.

Function Description:

The primary function of the AILE X5 is to measure and display systolic blood pressure (SYS), diastolic blood pressure (DIA), and pulse rate (PUL). These measurements are shown on a clear digital display, making it easy for users to read their results. A key feature of this monitor is its ability to record the date and time of each measurement, providing a chronological record of the user's blood pressure trends. This time-stamping capability is essential for monitoring health over time and sharing data with healthcare professionals. The device also includes a memory function, allowing users to store and review past readings.

Important Technical Specifications:

While specific technical specifications such as measurement range, accuracy, and power consumption are not explicitly detailed in the provided images, the device is powered by four AAA batteries, as indicated by the battery compartment image. The display shows units in mmHg for blood pressure and /MIN for pulse rate, which are standard units in blood pressure monitoring. The device features three main buttons: SET, MEM (Memory), and START/STOP, which control its various functions. The display also indicates the year, month, day, hour, and minute, confirming its time-keeping capabilities.

Usage Features:

The AILE X5 is designed for ease of use, particularly concerning its time-setting function.

1. Battery Installation: The device requires four AAA batteries. It's important to note that each time the batteries are changed, the internal clock resets to zero, necessitating a time reset.
2. Initiating Time Setting: To begin setting the time, the user must press and hold the SET button for 3 seconds. This action causes the year to appear and flash in the top right corner of the display, indicating that it's ready for adjustment. It's crucial not to press any other buttons before pressing SET to avoid disrupting the process.
3. Setting the Year: Once the year is flashing, the MEM button is used to adjust the year. For instance, if the device initially displays "2021," pressing MEM will change it to "2023" (or the current year). A critical note is that if the MEM button is pressed more than once, the number cannot be adjusted downwards. In such a scenario, the user must reinstall the batteries to reset the device and start the time adjustment process again from the beginning.
4. Setting the Month: After the year is correctly set, pressing the SET button again will cause the month to start flashing. The MEM button is then used to adjust the month to the current value.
5. Setting the Day: Once the month is set, pressing SET again will make the day start flashing. The MEM button is then used to adjust the day to the current date.
6. Setting the Hour: Following the day setting, pressing SET will cause the "hour" to flash. The MEM button is used to adjust the hour to the current time.
7. Setting the Minutes: Finally, after the hour is set, pressing SET will make the "minutes" flash. The MEM button is then used to adjust the minutes to the current time.
8. Finalizing Time Setting and Measurement: After all time parameters (year, month, day, hour, and minutes) are set, pressing the SET button one last time will finalize the settings. The device is then ready for blood pressure measurement. To take a reading, the user simply presses the "START" button. The device will automatically record the time stamp for each measurement, ensuring accurate data logging.

Maintenance Features:

The primary maintenance feature highlighted is the necessity to reset the time after each battery change. This ensures that all recorded measurements are accurately time-stamped, which is vital for long-term health monitoring. The device's design, with easily accessible battery compartment, suggests simple battery replacement. While not explicitly stated, general maintenance for such devices typically includes keeping the unit clean and dry, and storing it in a safe place to prevent damage. The clear instructions for time setting also serve as a guide for maintaining the device's accuracy in data recording.

In summary, the AILE X5 blood pressure monitor is a practical and user-friendly device for personal health monitoring, emphasizing accurate time-stamped measurements and straightforward operation.

AILE X5 Specifications

General

Brand	AILE
Model	X5
Category	Blood Pressure Monitor
Language	English