AILE FC-BP131 - Technical Description and EMC; Electromagnetic Compatibility (EMC)

22
3.6 Technical description
3.6.1 All necessary instructions for maintaining BASIC SAFETY and
ESSENTIAL PERFORMANCE with regard to electromagnetic disturbances
for the excepted service life.
3.6.2 Guidance and manufacturer’s declaration -electromagnetic
emissions and Immunity
Table 1
Table 2
Guidance and manufacturer’s declaration - electromagnetic emissions
Emissions test
RF emissions CISPR 11
RF emissions CISPR 11
Harmonic emissions IEC 61000-3-2
Voltage fluctuations/flicker emissions
IEC 61000-3-3
Compliance
Group 1
Class B
Class A
Compliance
Guidance and manufacturer’s declaration - electromagnetic Immunity
Immunity Test
Electrostatic
discharge (ESD)
IEC 61000-4-2
±8 kV contact±2 kV,
±4 kV, ±8 kV,
±15 kV air
±8 kV contact±2 kV,
±4 kV, ±8 kV, ±15 kV air
Electrical fast
transient/burst
IEC 61000-4-4
Power supply lines：
±2 kV 100 kHz
repetition frequency
Power supply lines：±2 kV
100 kHz repetition
frequency
Surge IEC 61000-4-5
Voltage dips, short
interruptions and
voltage variations on
power supply input
lines IEC 61000-4-11
0% 0.5 cycle At 0º,
45 º, 90 º, 135 º, 180 º,
225 º, 270 º and 315 º
0% 1 cycle And 70%
25/30 cycles Single
phase: at 0 0%
300 cycle
line(s) to line(s)：
±1 kV.
line(s) to line(s)：±1 kV.
0% 0.5 cycle At 0º, 45 º,
90 º, 135 º, 180 º, 225 º, 270 º
and 315 º 0% 1 cycle And
70% 25/30 cycles Single
phase: at 0 0% 300 cycle
IEC 60601-1-2
Test level
Compliance level